You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • LSI Industries LED 114 Watt SS Canopy Light Fixture CRUS SC LED SS CW UE WHT LSI Industries LED 114 Watt SS Canopy Light Fixture CRUS SC LED SS CW UE WHT

LSI Industries Legacy LED 98 Watt SS Canopy Light Fixture CRUS SC LED SS 50 UE WHT

Quick Overview

The Legacy LED Canopy fixture is the latest innovation in LED canopy lighting

 Purpose Built • Performance Driven • Stunningly Attractive

• During the day the CRU disappears, assuring that attention goes to your marketing elements, not the canopy fixture
• Full panel brilliance, properly scaled to your canopy, with no annoying gaps or glaring diode point sources
• High Performance, Low Cost – most cost-effective LED canopy fixture in the marketplace
• Designed for utility and/or DLC approval and rebate participation


HOUSING - Low profile, durable die-cast, aluminum construction, providing a reliable weather-tight seal.

- Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal).

- Choice of Low Wattage (LW) or Super Saver (SS).

- Choice of Symmetrical or Asymmetrical, which directs light through a clear tempered glass lens, to provide a uniform distribution of light to vertical and horizontal surfaces.

- Features an ultra-slim 7/8” profile die cast housing, with a flat glass lens. Unit is water-resistant, sealed to an IP67 rating. Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture.

- Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure.

- Designed for lighter than air fuel applications. Product is suitable for Class 1 Division 2 only when properly installed per LSI installation instructions (consult factory).

- State-of-the-art driver technology superior energy-efficiency and optimum light output. Driver components are fully encased in potting for moisture resistance. Complies with IEC and FCC standards.

- Die cast aluminum, wet location rated driver/electrical enclosure is elevated above canopy deck to prevent water entry, provide easy “knock-out” connection of primary wiring and contributes to attaining the lowest operating temperatures available. Seals to optical housing via one-piece molded silicone gasket.

- -40°C to 50°C (-40°F to +122°F)

- Universal voltage power supply, 120-277 VAC, 50/60 HZ input. Drivers feature two-stage surge protection (including separate surge protection built into
electronic driver) meets IEEE C62.41.2-2002, Scenario 1, Location Category C.

- Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process. DuraGrip withstands extreme weather changes without cracking or peeling.

- One person installation. No additional sealant required. Installs in a 12” or 16” deck pan. Deck penetration consists of a 4” hole, simplifying installation and water sealing. Unit is designed to quickly retrofit into existing Scottsdale (4”) hole as well as openings for Encore and Encore Top Access and to reconnect wiring for the SC/ECTA without having to relocate the conduit. Retro panels are available for existing Encores (see back page) as well as kits for recessed and 2x2 installations (see separate spec sheets). Support brackets are provided standard, to prevent sagging of deck.

- 27 pounds (single pack), 48 pounds (double pack).

- Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location. See LSI web site for specific guidance.

- Limited 5-year warranty.

- UL and ETL listed to UL 1598, UL 8750 and other U.S. and International safety
standards. Suitable for wet locations.

PHOTOMETRICS - Applications layouts are available upon request.

Old Product Number:  CRUS SC LED SS CW UE WHT

Additional Information

Part Number CRUS SC LED SS 50 UE WHT
Manufacturer LSI
Watts 98 Watts
Lumens 13674
Lumens Per Watt 140
CRI 70
Color Temperature 5000 Kelvin
Beam Angle 160°
Input Voltage 120V-277V
Rated Life 100,000 hours +
Minimum Operating Temperature -40°C or -40°F
Maximum Operating Temperature 50°C or +122°F
Dimensions 15 15/16” x 15 15/16`” x 7 1/8"
Certifications , , ETL Listed, , , , , ,
Manufacturer Warranty 5 Year
Specification Sheet

 CRUS Data Sheet

UPC Code No
Lead Time Build Item 7-10 Days

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Contact Us