SMARTTEC™ THERMAL CONTROL - Sensors in driver enclosure reduce drive current when ambient temperatures exceed 50°C. Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached.
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location. See LSI web site for specific guidance.
LEDs - Select high-brightness LEDs in Cool White (5000°K nominal) or Neutral White (4000°K nominal) color temperature. 70 CRI (nominal).
DISTRIBUTION/PERFORMANCE - Type S (Standard Symmetric). Exceptional uniformity creates bright environment at lower light levels.
HOUSING - One-piece, die-formed aluminum. Weather-tight housing contains factory prewired driver and field connections. Extruded one-piece EPDM gasketed wiring access door (with safety lanyard) is located underneath and utilizes tool-less thumbscrew fastener.
OPTICAL UNIT - Clear tempered optical grade flat glass lens sealed to aluminum optics housing creates an IP67 rated, sealed optical unit (includes pressure-stabilizing breather). Optical unit is recessed into housing cavity and sealed to the housing with extruded onepiece EPDM gasket. Optical unit lanyard serves dual purposes of safety and provides positive ground between unit and housing.
MOUNTING - Tapered rear design allows fixtures to be mounted in a quad pattern without the need for extension arms. Use with 3” reduced drilling pattern on round and square poles. A round pole plate (X4RPP, X5RPP) is required for mounting to round poles. Wall mount available by ordering wall mounting bracket (BKS-XBO-WM-*-CLR). See Accessory Ordering Information chart for all brackets.
ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277VAC (50/60Hz input), and 347-480 VAC. Optional twistlock photocell receptacle is available. Photocell must be ordered separately. Fixture Watts: LW -78, SS - 130 nominal.
DRIVER - Available in LW (Low Wattage) and SS (Super Saver) drive currents (Drive currents are factory programmed). Components are fully encased in potting material for IP65 moisture resistance. Driver complies with IEC and FCC standards. Driver and key electronic components can easily be accessed.
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF).
FINISH - Fixtures are finished with LSI's DuraGrip ® polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling.
WARRANTY - LSI LED fixtures carry a limited 5-year warranty.
PHOTOMETRICS - Application layouts are available upon request.
SHIPPING WEIGHT (in carton) - 31 lbs. / 14.1 Kg (fixture only). Add mast arm weight for total shipping weight.
LISTING - ETL listed to U.S. and International safety standards. Suitable for wet locations.
|Part Number||PASU S LED LW CW UE|
|Lumens Per Watt||100|
|Color Temperature||4000 Kelvin, 5000 Kelvin|
|Minimum Operating Temperature||-40ºC | -40ºF|
|Maximum Operating Temperature||+50ºC | +122ºF|
|Dimensions||26 1/2" x 18 3/8" x 6 7/16"|
|Manufacturer Warranty||5 Year|
|Certifications||, , , , , , , ,|