FREE LARGE PROJECT CONSULTATION

CLICK HERE to schedule an appointment with our lighting expert.

5% OFF ANY ORDER Use Code: SUPER5OFF

 

LSI XCN4 Constitution Decorative Pedestrian LED Area Light

LSI XCN4 Constitution Decorative Pedestrian LED Area Light

Featuring LSI’s high-performance LED optical system, the Constitution is designed for illuminating pathways, walkway areas and campus sites. Its ultra-modern, sleek two-arm design complements innovative architectural design elements of a site. These fixtures provide equal to or better performance than existing HID alternatives and save over 40% in energy when compared to them.

$1,401.73
Lead Time
Build Item 2-3 Weeks
SKU
XCN4

LSI XCN4 Constitution Decorative Pedestrian LED Area Light

Optical System:
• State-of-the-Art one piece silicone optic sheet delivers industry leading optical control with an integrated gasket to provide IP66 rated sealed optical chamber in 1 component.
• Proprietary silicone refractor optics provide exceptional coverage and uniformity in IES Types 2, 3, 5W and FT.
• Silicone optical material does not yellow or crack with age and provides a minimum light transmittance of 93%.
• Optical distributions are field rotatable (in 90˚ increments).
• Available in 5000K, 4000K, and 3000K (+/- 275K) color temperatures.
• Minimum CRI of 70. Consult Factory for Higher CRI requirements.
• Integral Louver (IL) option available for improved back-light control without sacrificing street side performance.

Electrical:
• High-performance driver features over-voltage, under-voltage, short-circuit and over temperature protection.
• 0-10V dimming (10% - 100%) standard.
• Standard Universal Voltage (120-277 Vac) Input 50/60 Hz or optional High Voltage (347-480 Vac).
• L70 Calculated Life: >100k Hours
• Total harmonic distortion: <20%
• Operating temperature: - -40°C to +50°C (-40°F to +122°F)
• Power factor: >.90 • Input power stays constant over life.
• Field replaceable surge protection device meets a minimum Category C Low operation (per ANSI/IEEE C62.41.2).
• High-efficacy LEDs mounted to metal-core circuit board to maximize heat dissipation
• Terminal block provided accepts up to 10ga wire, however the luminaire is supplied with a 32’ 3 conductor wire harness.
• Components are fully encased in potting material for moisture resistance. Driver complies with FCC standards. Driver and key electronic components can easily be accessed.

Construction:
• Rugged die-cast aluminum housing.
• Cast aluminum wiring access door located in lower hub/fitter.
• Rigid die-cast aluminum arms for consistency and strength.
• Precision die cast aluminum heatsink and optical frame.
• Removable spun aluminum cap/driver enclosure is retained by captive stainless steel fasteners and safety cables. Housing and top cap interface is sealed with a one-piece extruded silicone gasket. Tool-less entry option is available.
• All exposed fasteners are black oxide coated stainless steel. Internal fasteners are stainless steel or zinc electroplated steel.
• Luminaire is proudly made in the U.S.
• IP65 rated luminaire protects integral components from harsh environments.
• 1.5G rated for ANSI C136.31 high vibration applications
• Fixtures are finished with LSI’s DuraGrip® polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling. Other standard LSI finishes available. Consult factory.
• Shipping weight: 45 lbs in carton.

Controls:
• Optional integral passive infrared motion and daylight sensor activates switching of luminaire light levels (see page 5 for more details).
• 7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist lock photocontrols or wireless control modules.
• LSI’s Gold and Platinum wireless control system options reduce energy and maintenance costs while optimizing light quality 24/7. (see page 5 for more details)

Installation:
• Mounts to 4” O.D. pole or tenon.
• Secures to pole with 6 stainless steel set screws.
• 32’ wire leads are provided bundled in the slip fitter hub for ease of wiring.

Warranty:
• LSI LED Fixtures carry a 5-year warranty.

Listings:
• Listed to UL 1598 and UL 8750.
• RoHS Compliant. • State of California Title 24.
• DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.
• American Recovery and Reinvestment Act Funding Compliant.
• Lighting Facts Approved.
• Suitable For wet Locations.
• IP65 rated Luminaire. IP66 rated optical chamber.
• 1.5G rated for ANSI C136.31 high vibration applications

More Information
Part Number XCN4
Manufacturer LSI
Watts 75 Watts, 155 Watts, 238 Watts
Lumens Varies
Lumens Per Watt Varies
CRI 70
Color Temperature 3000 Kelvin, 4000 Kelvin, 5000 Kelvin
Beam Angle Not Specified
Input Voltage 120V-277V, 480V
Rated Life 100,000 hours +
Minimum Operating Temperature -40° F
Maximum Operating Temperature 122° F
Dimensions 37 1/4" x 25 1/2"
Warranty 5 Year
Certifications , , , , , , , , ,
Specification Sheet

 XCN4 Data Sheet

Lead Time Build Item 2-3 Weeks
Write Your Own Review
You're reviewing:LSI XCN4 Constitution Decorative Pedestrian LED Area Light
Customer Questions
No Questions
Please, mind that only logged in users can submit questions
Ask a question about: LSI XCN4 Constitution Decorative Pedestrian LED Area Light