FREE LARGE PROJECT CONSULTATION

CLICK HERE to schedule an appointment with our lighting expert.

5% OFF ANY ORDER Use Code: SUPER5OFF

 

LSI XLCL Slice Area LED Light HO 545w

LSI XLCL Slice Area LED Light HO 545w

Slice LED area lights give you the best possible lumens per dollar in the marketplace. With its super sleek, low-profile housing and sophisticated high performance optics, the Slice is the perfect parking lot lighting solution. Available in three fixture sizes, with a choice of optics and drive currents, the XLCS provides up to 15,700 lumens, the XLCM provides over 31,100 lumens and the XLCL hit 59,100 lumens. XLCS is the ideal replacement for 400W metal halide while the XLCM can replace up to 1000W Metal Halide. The XLCL can easily replace a 1500w or greater.   These low profile fixtures, with the optical assembly less than 2” thick (3" XLCL), have very low EPA, allowing the use of a lighter gauge pole.   Recommended mounting height for the XLCL is between 20'-45'

*This item is shown at list price, contact us for a discounted rate or click the add to quote button.

How To Order:
1.  This fixture comes in 2 output levels.  SS = Super Saver 435 watt | HO = High Output 545 watt
2. Choose your light distribution pattern
• Type 3, Type 4 FT, and Type 5 Available (FT left and right on request)
3.  Choose your light color temperature.

• 4000k Neutral white, Commercial, Office, Retail
• 5000k Cool white - Commercial, Retail, Industrial
4. Choose your fixture color
• Black, Bronze and White are Standard.   Other options such as Metallic Silver, Platinum, and Satin Verde Green on request
5.  Add any optional items
• Photocells and sensors can be helpful and save money,

Typical Part Numbers:
XLCM 3 LED HO CW UE BLK
XLCL FT LED HO CW UE BLK
XLCL FT-L LED HO CW UE BLK
XLCL FT-R LED HO CW UE BLK 
 
XLCL 5 LED HO CW UE BLK
 

$1,508.56
Lead Time
Build Item 2-3 Weeks
SKU
XLCL

LSI XLCL Slice Area LED Light HO 545w

XLCL Light Output Type 3 Lumens Type FT Lumens Type 5 Lumens Watts
CW SS 45800 49500 50700 545
HO 53400 57300 59100 545
NW SS 45600 48600 49600 435
HO 52800 56300 57600 545

SMARTTEC™ - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceed rated temperature.

ENERGY SAVING CONTROL OPTION - DIM - 0-10 volt dimming enabled with controls by others.

EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location. See LSI web site for specific guidance.

LEDS - Select high-brightness LEDs in Cool White (5000K), or Neutral White (4000K) color temperature, 70 CRI.

DISTRIBUTION/PERFORMANCE - Types 3, 5, FT, FT-L and FT-R. FT-L and FT-R allow for D180 mounting configurations with factory set optics for applications such as automotive front row. Exceptional uniformity creates bright environment at lower light levels.

HOUSING - One-piece, die-formed aluminum housing contains factory prewired driver in a gasketed, weather-resistant wiring compartment. Hinged wiring access door (with safety lanyard) located underneath. Fixture is IP65 rated.

OPTICAL UNIT - Clear tempered optical-grade flat glass lens permanently sealed to weathertight aluminum optic frame (includes pressure-stabilizing breather).

MOUNTING - Tapered rear design allows fixtures to be mounted in 90° and 120° configurations. Use with 5” traditional drilling pattern. A round pole plate (RPP2) is required for mounting to round poles. Wall mount available by ordering wall mounting bracket (BKSBO-WM-*-CLR).

ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277VAC (50/60Hz input) and 347-480 VAC. Optional twistlock photocell receptacle is available. Photocell must be ordered separately.

DRIVER - Available in SS (Super Saver) and HO (High Output) drive currents. Components are fully encased in potting material for moisture resistance. Driver complies with FCC standards. Driver and key electronic components can be easily accessed.

OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F)

FINISH - Fixtures are finished with LSI’s DuraGrip® polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling. Available in black, bronze and white. Other standard LSI finishes available. Consult factory.

WARRANTY - LSI LED fixtures carry a limited 5-year warranty.

PHOTOMETRICS - We can provide IES files.   Renderings and layouts available upon request.

SHIPPING WEIGHT (in carton) - 55 lbs./24.9Kg

LISTING - UL listed to US and international safety standards. Suitable for wet locations.

Typical Part Numbers:
XLCM 3 LED HO CW UE BLK
XLCL FT LED HO CW UE BLK
XLCL FT-L LED HO CW UE BLK
XLCL FT-R LED HO CW UE BLK 
 
XLCL 5 LED HO CW UE BLK

More Information
Part Number XLCL 5 LED HO CW UE BLK
Manufacturer LSI
Watts 545 Watts
Lumens 59100
CRI 70
Color Temperature 4000 Kelvin, 5000 Kelvin
Beam Angle 140°
Input Voltage 120V-277V
Rated Life 100,000 hours +
Minimum Operating Temperature -40° F
Maximum Operating Temperature 122° F
Dimensions 46.3125" x 25" x 7.25"
Warranty 5 Year
Certifications , , , , , , , , , ,
Specification Sheet

 XLCL Data Sheet

Lead Time Build Item 2-3 Weeks
Write Your Own Review
You're reviewing:LSI XLCL Slice Area LED Light HO 545w
Customer Questions
No Questions
Please, mind that only logged in users can submit questions
Ask a question about: LSI XLCL Slice Area LED Light HO 545w